Building an Automated Smart Greenhouse
An ESP32 greenhouse controller with capacitive soil sensors, DHT22, relay-driven irrigation, hysteresis logic, and the power and calibration problems that make or break it.
16 articles filed under Projects.
An ESP32 greenhouse controller with capacitive soil sensors, DHT22, relay-driven irrigation, hysteresis logic, and the power and calibration problems that make or break it.
Build an ESP32 dual-axis solar tracker with an LDR array, servos, and INA219 measurements, then compare its energy output against a fixed panel.
Control a 5-DOF robotic arm with an MPU6050 gesture sensor and nRF24L01 wireless link, with inverse kinematics notes and practical safety tips.
A Raspberry Pi, OpenCV and a YOLO nano model, turned into a vehicle counter with tracking, density estimation and a dashboard, using a toy-car test track.
Event-driven ESP32-CAM nodes with PIR triggers, MQTT messaging and an OpenCV-verifying Raspberry Pi hub, designed around bandwidth, privacy and consent.
A Raspberry Pi and STM32 rover design with differential-drive odometry, GPS and gyro heading fusion, waypoint navigation and honest limits on soil moisture and pH data.
An ESP32 and NEO-6M GPS tracker with SIM800L uploads, geofencing, and a live dashboard, plus the power, privacy, and reliability problems that matter.
A practical design walkthrough for a long-range ESP32 and SX1278 LoRa disaster alert network, covering packet design, GPS, power budgeting, and the failures that actually bite.
A sensor-head and base-station design with STM32, BME680, PMS5003, UV, wind and rain sensors, a checksummed serial protocol, SQLite storage and data quality flags.
An ESP32 air quality monitor using PMS5003, BME280, and an OLED, with honest notes on particulate measurements, UART parsing, and live dashboards.
Build an ESP32 RFID locker with MFRC522, keypad, OLED, servo lock, and access logs, plus the security limits nobody should ignore.
An ESP32 water quality station using pH, TDS, turbidity, and temperature sensors, with calibration notes, an ADS1115 front end, and honest limits.
An STM32 design that fuses ADXL345 vibration, motor current, temperature and encoder speed using timer-triggered ADC, DMA and CMSIS-DSP FFT to flag motor faults.
Track voltage, current, and power with an INA219, log energy to a dashboard, and learn the difference between power and energy with safe, low-voltage practice.
Use an ESP32 and MPU6050 to collect vibration data, extract RMS and FFT features, and build an honest early-warning system for small machines.
A walkthrough of CircuitShelf, my web-based electronics inventory manager. Learn how to add components, sync across devices, track availability, manage costs, customize the interface, and export backups.