Building an Automated Smart Greenhouse
An ESP32 greenhouse controller with capacitive soil sensors, DHT22, relay-driven irrigation, hysteresis logic, and the power and calibration problems that make or break it.
12 articles tagged “ESP32”.
An ESP32 greenhouse controller with capacitive soil sensors, DHT22, relay-driven irrigation, hysteresis logic, and the power and calibration problems that make or break it.
Build an ESP32 dual-axis solar tracker with an LDR array, servos, and INA219 measurements, then compare its energy output against a fixed panel.
An ESP32 and NEO-6M GPS tracker with SIM800L uploads, geofencing, and a live dashboard, plus the power, privacy, and reliability problems that matter.
A practical design walkthrough for a long-range ESP32 and SX1278 LoRa disaster alert network, covering packet design, GPS, power budgeting, and the failures that actually bite.
An ESP32 air quality monitor using PMS5003, BME280, and an OLED, with honest notes on particulate measurements, UART parsing, and live dashboards.
Build an ESP32 RFID locker with MFRC522, keypad, OLED, servo lock, and access logs, plus the security limits nobody should ignore.
An ESP32 water quality station using pH, TDS, turbidity, and temperature sensors, with calibration notes, an ADS1115 front end, and honest limits.
Track voltage, current, and power with an INA219, log energy to a dashboard, and learn the difference between power and energy with safe, low-voltage practice.
Use an ESP32 and MPU6050 to collect vibration data, extract RMS and FFT features, and build an honest early-warning system for small machines.
A look inside my ESP32-based inventory manager and dashboard, including the custom keypad, RTC integration, power optimization, LittleFS storage, and plans for voice control.
A personal technical blog where I document electronics projects, Arduino experiments, ESP32 builds, sensors, IoT, and the things I learn along the way.
A practical, wiring-first guide to reading distance from an HC-SR04 ultrasonic sensor on an ESP32 using the Arduino core, including the 5V-tolerance gotcha most tutorials skip.